Pioneer MJ-L77 - Manual (Page 29)

7 Editing
29
In Use
1 Select the track you want to move.
The disc can be stopped (with the track information shown in the display), or
in play-pause mode.
2 Press MENU and select MOVE.
Remember: switch between menu options using the
$ and ›
buttons; select the option by pressing SET .
3 Use the
$ and › buttons to select a
new track number, then press SET.
The display shows the track your moving and its new number. You can't select
a track number higher than the total number of tracks on the disc.
4 Confirm that you want to move the track.
Press SET to move the track, or CANCEL to cancel the edit. The display
shows COMPLETE once the edit has been made.
Reordering Tracks on a Disc
The track reorder feature takes the play order you've programmed for the disc using
the program play feature (see page 17), and reorders the tracks on the disc accord-
ingly. If you want to change the position of more than a couple of tracks on the disc,
it's probably quicker to do it this way than use the move track function described on
the previous page.
1 Program the track playback order.
See page 17 for more on how to do this.
Note: If you program fewer tracks than are on the disc, those tracks will
appear at the start of the disc, while the remainder will be left in the original
order at the end of the disc.
2 Press MENU and select PGM MOVE.
Remember: switch between menu options using the
$ and ›
buttons; select the option by pressing SET .
3 Confirm that you want to reorder the tracks.
Press SET to reorder the tracks, or CANCEL to cancel the edit. The display
shows COMPLETE once the edit has been made.
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
MENU SET
4 ¢
Display shows track 4 selected
Track 4 will become the new
track 6 (the current tracks 5
and 6 will become 4 and 5)
Display after pressing SET
A 9-track MD with the playlist
programmed (running time of
the playlist is also displayed)