Pioneer MJ-L77 - Manual (Page 11)

4 Switching On
11
In Use
1 Switch on.
You can use the STANDBY / ON button on either the remote control or the
CD receiver unit to do this.
The display lights and briefly indicates the current volume level before
showing the current function (e.g., CD).
Note: The complete system, including CD receiver and optional tape deck
consumes a small amount of electricity (about 1W) in standby mode.
2 Load an MD.
Gently push the MD into the slot in the direction indicated on the disc
cartridge. The recorder pulls the MD into the recorder automatically.
If you’ve just loaded a playback-only disc or an erase-protected recordable
disc (i.e., the erase-protect tab is open), then the disc should already be
playing. This feature is called Auto Play.
3 Press the MD button to start playback.
Alternatively, press
^ on the front panel of the recorder.
This won’t be necessary if Auto Play has already started playback!
4 To pause playback, press the MD button.
To resume playback, press again.
You can also use the MD recorder’s front panel controls:
Press
^ once to pause playback; press again to resume.
5 To fast-reverse or fast-forward, press and
hold
$ or ›.
You should hear snippets of sound to give you some idea of where you are in
the track. Release the button to resume normal playback.
Continues
Playing an MD
You should now have your MD recorder connected up to the rest of the system, and
plugged into the power outlet. This chapter takes you through the basics of using the
MD recorder — playing discs and making a recording from the CD receiver.
When following the steps below, use either a playback-only disc, or a recordable MD
that already has some tracks recorded on it.
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
7
4 ¢
STANDBY/ON
MD
INSERT THIS END
MD
74mins
All MDs indicate which way
they should be loaded into
the player/recorder
If a track has been named, the
name appears in the display
while the track is playing
Display shows the CD player as
the current function (no disc
loaded)
MD recorder reads the table of
contents when you load a disc
Display showing an MD with 5
tracks and a total playing time
of 43:24