Pioneer MJ-L77 - Manual (Page 14)

4 Switching On
14
Automatically Recording from a CD
This feature makes recording a CD as simple as possible by automatically starting and
stopping the CD and MD together. There are two modes: 1 track synchro records just a
single track, then stops; all-track synchro records the whole disc.
1 Load a recordable MD.
Make sure that the erase-protect tab is closed so that you can record.
If there’s already material recorded on the disc, the recorder automatically
records new material after what’s already there—there’s no need to search for
blank space to record on.
You can find out how much blank space you have left on the disc by
switching the display mode at this point. See page 12 for how to do this.
2 Press CD to switch to the CD player.
3 Load the CD you want to record.
Press
& to make sure the disc is stopped.
4 If you want to record just one CD track,
select it using the
$ and › buttons.
5 Press MD REC.
The recorder goes into record-pause mode, waiting for you to start the CD
player.
6 Press CD to start the CD playing.
Recording starts automatically with the CD.
Should you want to stop recording before the track/disc has finished playing,
simply press
& any time during the recording.
Once the track or disc has finished, the recorder goes into record-pause mode.
At this point, you can either press
& to finish the recording session, or
continue recording a different disc (or tracks) by repeating steps 3, 4 and 6.
Display showing that you’ve
loaded a blank disc
The CD display showing a disc
with 14 tracks and a total
playing time of 59:47
The SYNCHRO indicator lights
and the red MD record indicator
flashes
Once recording starts, the MD
record indicator remains lit
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
CD MD REC
4 ¢
MD