Pioneer MJ-L77 - Manual (Page 25)

7 Editing
25
In Use
Disc mode/display
Stopped/disc info
Stopped/track info
Stopped/program-play
Playing/any
Play-pause/any
Recording/any
Record-pause/any
About MD Editing
The MD system allows for very flexible editing of discs. Using the editing features
described on the following pages you can easily: create names for discs and for indivi-
dual tracks; combine two tracks into one long one, or divide a track into two short
ones; move single tracks, or reorder a whole disc; erase tracks or erase the whole disc.
Not all of these functions are available in any mode: the table below shows what
editing functions you have access to in each MD mode.
Naming a Disc
You can name a recordable MD so that when you load the disc into the recorder, the
disc's name appears in the display. The name can be up to 100 characters long,
including spaces. You can change disc names on recordable MDs (if you've recorded
something else on the disc, for example), but you can't change the name of a
playback-only disc.
1 Make sure the disc is stopped .
To be able to name the disc, the disc must be stopped with the disc informa-
tion showing in the display.
2 Press MENU and select DISC NAME.
Remember: switch between menu options using the
$ and ›
buttons; select the option by pressing SET .
3 Enter a name for the disc.
Names can be up to 100 characters long and can contain letters (upper and
lower case), numbers, spaces and other symbols.
Continues
Disc
name
•
Track
name
•
•
•
•
•
Divide
•
Com-
bine
•
•
Move
•
•
Pgm
move
•
Erase
•
•
Undo
•
•
All
Erase
•
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
MENU SET
4 ¢
MD DISPLAY
Display shows a flashing cursor
where the first character will go