Changing the display, 4 switching on, When an md is stopped – Pioneer MJ-L77 User Manual
Page 12: When an md is playing, 7to stop playback, press, 8to eject the disc, press )
4 Switching On
12
6
To skip back or forward to another track,
press (but don't hold)
$ or ›
Pressing
› once skips to the start of the next track on the disc. Further
presses take you to subsequent tracks.
Pressing
$ once takes you to the beginning of the current track. Further
presses skip to the start of previous tracks.
You can use the track skip buttons while the disc is paused, too. The track
number changes while the disc remains paused.
7
To stop playback, press
&
If the disc was paused, then the pause mode is cancelled.
8
To eject the disc, press
)
This button is on the front panel only.
Changing the Display
You can choose to display various kinds of information during playback, recording
and stop modes. Switch between them by pressing the
DISPLAY
button.
When an MD is stopped
• If the display shows the disc name/total playing time:
DISC
NAME
- displays the name of the disc, if one has been programmed
DISC
TOTAL
- displays the total playing time of the disc
REC
REMAIN
- displays the amount of recording time available
CLOCK
- displays the current time and date
CALENDAR
- displays the current date
DIMMER
- adjusts the display brightness (see page 43 of XC–L77 manual)
• If the display shows a track name/playing time of a track:
TRACK
NAME
- displays the name of the current track, if one has been programmed
TRACK
TIME
- displays the playing time of the current track
CLOCK
- displays the current time and date
CALENDAR
- displays the current date
DIMMER
- adjusts the display brightness (see page 43 of XC–L77 manual)
When an MD is playing
TRACK
NAME
- displays the name of the current track, if one has been programmed
TRACK
TIME
ELAPSED
- displays time into the current track
TRACK
REMAIN
- displays how long the current track still has to play
ALL
REMAIN
- displays how long the disc still has to play
CLOCK
- displays the current time and date
CALENDAR
- displays the current date
DIMMER
- adjusts the display brightness (see page 43 of XC–L77 manual)
Disc name display
Disc total display
Record remain display
Clock display
Calendar display
Track name display
Track time elapsed/Track remain
displays
All remain display