Pioneer MJ-L77 - Manual (Page 15)

4 Switching On
15
In Use
Automatically Recording a Tape
Use this feature if you want to transfer material from tape to MD. Recording starts and
stops automatically with the tape, and you can set the tape to auto-reverse so that you
can copy both sides of the tape all in one go.
1 Load a recordable MD.
Make sure that the erase-protect tab is closed so that you can record.
If there’s already material recorded on the disc, the recorder automatically
records new material after what’s already there—there’s no need to search for
blank space to record on.
You can find out how much blank space you have left on the disc by
switching the display mode at this point. See page 12 for how to do this.
2 Press TAPE to switch to the tape deck.
3 Load the tape you want to record.
Press
& to make sure the tape is stopped.
4 Set the reverse mode, play direction and
Dolby NR as required.
If you want to record the whole tape, set the reverse mode to
p ; if you just
want to record just one side, set it to
“ .
If the tape was recorded using Dolby NR, then Dolby NR should be switched
on for best results.
See pages 22 and 33 of the XC–L77 manual for detailed instructions.
5 Press MD REC.
The recorder goes into record-pause mode, waiting for you to start the tape.
6 Press TAPE to start the TAPE playing.
Recording starts automatically with the tape.
Should you want to stop recording before the tape has finished playing,
simply press
& any time during the recording.
Once the tape (or side of the tape) has finished, the recorder goes into record-
pause mode. At this point, you can either press
& to finish the recording
session, or continue recording a different tape by repeating steps 3, 4 and 6.
Recordable MD with 3 tracks
already recorded
Recording time available is
shown as 62:56
Display shows tape direction set
to ‘forward’, auto-reverse off and
Dolby NR on
The SYNCHRO indicator lights
and the red MD record indicator
flashes
Once recording starts, the MD
record indicator remains lit
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL REC
$
! —
›
+ ⁄
VOL
STANDBY/ ON
TAPE MD REC
4 ¢
MD