Pioneer AVIC-X3-II - Manual (Page 99)

1 Select the repeat range.
= For details, refer to Repeating play on the
previous page
2 Touch [Scan] in Function menu.
Touching [ Scan] switches between [On] and
[ Off].
The first 10 seconds of each track of the cur-
rent folder (or the first track of each folder) is
played.
3 When you find the desired track (or
folder) touch [Scan] to turn scan play off.
p After track or folder scanning is finished,
normal playback of the tracks will begin
again.
Hands-free Phoning
Hands-free phoning with
mobile phones featuring
Bluetooth technology
3 2 5
6
4 1
(The screen when the registered phone is con-
nected)
If you use a Bluetooth adapter (e.g. CD-
BTB200) (sold separately), you can connect a
mobile phone featuring Bluetooth wireless
technology to this unit for hands-free, wireless
calls, even while driving. For details concern-
ing operation, refer to the Bluetooth adapter
’s
operation manual. This section provides brief
information on the hands-free phoning opera-
tions with this unit that slightly differs or is cut
short from the operations described in the
Bluetooth adapter
’s operation manual.
p Since this unit is always on standby to con-
nect with your mobile phones via Bluetooth
wireless technology, using this unit without
running the engine can result in battery
drainage.
1 Source icon
2 Device name indicator
3 Signal level indicator
p If the signal is not available, (
) is dis-
played.
p Depending on the mobile phones featur-
ing Bluetooth technology, this indicator
may not show on the screen.
4 Battery strength indicator
p Battery strength indicator may differ
from the actual battery strength.
Using the AV Source (Pioneer AV Equipment)
Engb
99
Chapter
08
Using
the
A
V
Source
(Pioneer
A
V
Equipment)