Pioneer AVIC-X3-II - Manual (Page 74)

Set
”Home”
= For details concerning operations, refer to
Registering your home and your favourite lo-
cation on page 58.
Map in Memory
The memory area is the area in the map,
which is being read in advance for the mem-
ory navi mode. There are two ways of setting
the memory area.
Around Current Position:
A square that has sides of approximately
17 km (10.6 miles) with the selected location at
the centre is read into the memory.
Indicate the map you want to store in the
memory by touching c, d, a or b. Then, ad-
just the map scale to the one you desire, and
touch [
OK].
Continuously touching c, d, a or b allows
you to rapidly scroll the map screen.
p An area not stored in the DVD Map Disc
cannot be memorised.
Around Current Route:
Sets the surrounding currently set route to the
memory area. The route to the destination will
appear on screen. You can memorise the area
by touching [
OK].
p The extent of the information that can be
set in the memory area is about 10.6 km
(6.6 miles) surrounding the route.
Set
”Go To”
= For details concerning operations, refer to
Registering your home and your favourite lo-
cation on page 58.
Demo Mode
This is a demonstration function for shops.
After a route is set, a simulation of route gui-
dance to a destination is automatically dis-
played. Normally, set this to [
Off].
Repeat:
Repeat demo drive.
Off*:
Demo Mode is set off.
p If you eject the DVD Map Disc during the
demo drive, the demo mode will be
stopped.
Time
Adjusts the systems clock. The time difference
(
+, -) between the time originally set in your
navigation system is set here.
You can also select summer time On/Off.
= For details, refer to step 7 in Installing the
Programme on page 141.
Summer Time
Choose whether or not to take summer time
into account.
On:
Summer time is taken into account.
Off*:
Summer time is not taken into account.
p When the period of summer time comes,
or when the summer time ends, this unit
does not automatically change the summer
time setting.
= Installing the Programme on page 141
Modify Current Location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
Customising Your Navigation System
Engb
74
Chapter
06