Initial settings, Adjusting initial settings 123, Setting the fm tuning step 123 – Pioneer AVIC-X3-II User Manual
Page 123: Switching auto pi seek 123, Customising the av source setting

p The DivX subtitles will be displayed even
when the subtitle file setting is on if no cor-
responding subtitle files exist.
p Up to three lines can be displayed at
once.
Initial Settings
Adjusting initial settings
1
Initial settings lets you perform initial set up of
different settings for navigation system.
1 Function display
1
Touch [Off] in AV Source screen to turn
source off.
= For details, refer to Selecting an AV source
2
Press MENU button to change to AV
MENU.
3
Touch [Initial].
Setting the FM tuning step
Normally the FM tuning step employed by
seek tuning is 50 kHz. When
AF or TA is on,
the tuning step automatically changes to
100 kHz. It may be preferable to set the tuning
step to 50 kHz when
AF is on.
% Touch [FM Step] in Initial menu.
Each time you touch [
FM Step] will switch the
FM tuning step between 50 kHz and 100 kHz
while
AF or TA is on.
p The tuning step remains at 50 kHz during
manual tuning.
Switching Auto PI seek
The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.
Customising the AV Source Setting
Engb
123
Chapter
09
Customising
the
A
V
Source
Setting