Pioneer AVIC-HD3 RU User Manual
Page 171
169
Ap
pe
nd
ix
NA
VI/
A
V
Symptom
Cause
Action (See)
CD or DVD playback is not possible.
The disc is inserted upside down.
Insert the disc with the label upward.
The disc is dirty.
Clean disc.
The disc is cracked or otherwise
damaged.
Insert a normal, round disc.
The files on the CD are an irregular
file format.
Check the file format.
The CD format cannot be played
back.
Replace disc.
The loaded disc is a type this system
cannot play.
Check what type the disc is. (Also see
at “Handling and Care of the Disc” in
the Hardware Manual and “Detail
Information for Playable Media” in
this manual for more cautions about
handling each type of media.)
No picture.
The handbrake lead is not connected
or applied.
Connect a handbrake lead correctly,
and apply the handbrake.
Handbrake interlock is activated.
Park your vehicle in a safe place and
apply the handbrake.
➲ Handbrake interlock ➞ Page 18
The [AV Input] setting is incorrect.
Please read the following page and
set the setting correctly.
The audio skipps.
The navigation system is not firmly
secured.
Secure the navigation system firmly.
Failure hard disk drive.
Consult your Pioneer dealer.
“Rear display” picture disappears.
The setting for [REAR SCREEN] is
incorrect.
Please read the following page and
set the rear screen setting correctly.
There was a problem with the “Rear
display” or a faulty wiring connec-
tion, for example.
Check the “Rear display” and its con-
nection.
When the gearstick is in [R], the rear
view camera images are displayed.
(When [MIRROR] is selected in
[REAR SCREEN] menu.)
Select [DVD] or [AV] in [REAR
SCREEN] menu. When you move
the gearstick to a position other than
[R], the screen will be returned to the
previous display.
[DVD-V Setup] is carried out
You can not display the video image
to “Rear display” during [DVD-V
Setup] menu.
The image on the “Rear Display” is in
black and white, or not displayed cor-
rectly.
The Rear Display output from the
navigation system is switched
between the NTSC, PAL and SECAM
system according to the image.
For some images, the image format
may not match that of the “Rear Dis-
play”.
• Use a product (e.g. AVD-W1100V)
that has an NTSC/PAL/SECAM
auto switch function for the “Rear
Display” as well.
• Manually switch between NTSC,
PAL and SECAM for “Rear Display”.
Nothing is displayed and the touch
panel keys cannot be used.
The setting for the rear view camera
is incorrect.
Connect a rear view camera cor-
rectly.
The gearstick was placed in [R] when
the rear view camera was not con-
nected.
Press the AV button to return to the
source display and then select the
correct polarity setting for [Camera
Input].
➲ About [Camera Input] setting ➞
The back light of the LCD panel is
turned off.
Press the V button to turn on the
back light.
Touch panel key is not respond or dif-
ferent key is respond.
Touch keys deviate from the actual
positions that respond to your touch
for some reason.
Perform the touch panel calibration.
“Adjusting the Response Positions of