Pioneer XC-HM70-K - Manual (Page 13)

Listening to a CD or MP3/WMA disc
13
En
English
Français
Español
Italiano
Nederlands
Deutsch
Listening to a CD or MP3/
WMA disc
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot
record on them. Some audio CD-R and CD-RW discs may not
be playable due to the state of the disc or the device that was
used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. MP3 is a type of audio code which is
processed by significant compression from the original audio
source with very little loss in sound quality.
• This system supports MPEG-1/2/2.5 Audio Layer 3
(Sampling rates: 8 kHz to 48 kHz; Bit rates: 32 kbps to 320
kbps).
• During VBR file playback, time counter in the display may
differ from its actual playback time.
WMA:
WMA files are Advanced System Format files that include
audio files which are compressed with Windows Media
Audio codec. WMA is developed by Microsoft as an audio
format file for Windows Media Player.
• This system supports WMA (Sampling rates: 32 kHz/44.1
kHz/48 kHz; Bit rates: 32 kbps to 320 kbps).
Disc playback
1 Press the STANDBY/ON button to turn the power on.
2 Press the CD button on the remote control or INPUT
button repeatedly on the main unit to select CD
function.
3 Press the button to open the disc tray.
4 Place the disc on the disc tray, label side up.
5 Press the button to close the disc tray.
6 Press the / ( ) button to start playback. After the
last track is played, the unit will stop automatically.
CAUTION
• Do not place two discs in one disc tray.
• Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
• Do not push the disc tray whilst it is moving.
• If the power fails whilst the tray is open, wait until the
power is restored.
• Be sure to place 8 cm disc in the middle of the disc tray.
Note
• Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
• “MP3” or “WMA” will appear after the unit reads
information on an MP3 or WMA disc.
• When the end of the last track is reached during fast
forward, “END” will appear on the display and CD
operation will be paused. When the beginning of the first
track is reached during fast reverse, the unit will enter the
playback mode (only for CD).
• Rewritable multi-session discs with unfinished writing,
can still be played.
• If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
Various disc functions
Resume:
1
You can resume the track you stopped.
While a disc is playing, press the button.
2 The system stores the track you stopped and is
blinking on the display.
To restart play, press the / ( ) button.
Play resumes from the beginning of the track you stopped.
To cancel the resume playback:
Press the button.
TIMER
INPUT
STANDBY/ON
TIMER
INPUT
STANDBY/ON
USB 5V 2.1A
PHONES AUDIO IN
Function Main unit
Remote
control
Operation
Play Press in the stop mode.
Stop Press in the playback
mode.
Pause Press in the playback
mode. Press the
/
button to resume
playback from the
paused point.
Track up/
down Press in the playback
or stop mode.
If you press the button
in the stop mode, press
the
/ button to start
the desired track.
Fast
forward/
reverse
Press in the playback
mode.
Release the button to
resume playback.
X-HM70_En.book 13 ページ ２０１１年７月１１日 月曜日 午前９時２３分