Seek tuning, Selecting a preset channel from the preset, Channel list – Pioneer AVIC-F860BT User Manual
Page 85: Storing broadcast frequencies, Switching to a channel with good receiving, Sensitivity automatically, Selecting a preset, Storing broadcast fre, Using the digital radio (dab)
Seek tuning
% Touch and hold one of the following
keys for about one second and then re-
lease.
Scans frequencies until it finds a broad-
cast strong enough for good reception.
You can cancel seek tuning by touching
either key briefly.
If you keep holding either key, you can
skip broadcasting frequencies. Seek
tuning will start when you release the
key.
Selecting a preset channel
from the preset channel list
Once you have stored broadcast channels,
you can easily recall preset channels from
memory with a single touch of a key.
= For details, refer to Storing broadcast fre-
1
Touch the preset channel list display
key.
1
1 Preset channel list display key
2
Touch the item on the list (
“1” to “6”) to
switch to a channel registered as a preset
channel.
p If you touch the preset channel list display
key while the preset channel list is dis-
played, the list disappears and the preset
tuning keys are displayed.
Storing broadcast frequencies
With a touch of any of the preset tuning keys
(
“1” to “6”), you can easily store up to six
broadcast channels for later recall (also with
the touch of a key).
1
Select a frequency that you want to
store in memory.
2
Touch and hold a preset tuning key [1]
to [6].
The selected radio station is stored in memory.
The next time you touch the same preset tun-
ing key
“1” to “6”, the service component is re-
called from memory.
p Up to 18 stations, six for each of the three
bands can be stored in memory.
Switching to a channel
with good receiving
sensitivity automatically
p This setting is available only when “Digital
Radio
” is selected as the source.
If the tuner cannot get good reception, this
product will automatically search for another
ensemble that supports the same service com-
ponent. If no alternative service component
can be found or reception remains poor, this
function will automatically switch to an identi-
cal FM broadcast.
p After the channel is switched, if the origin-
ally channel regains good receiving sensi-
tivity, the system switches back to the
original channel automatically.
1
Press the HOME button to display the
Top menu screen.
2
Touch the following keys in the follow-
ing order.
The
“System” screen appears.
Engb
85
Chapter
15
Using
the
Digital
Radio
(DAB)
Using the Digital Radio (DAB)