Pioneer AVIC-F860BT - Manual (Page 39)

Modifying the route
When navigation is already started, there are
several ways to modify the current route. The
following sections describe some of those op-
tions.
Checking route alternatives
when planning the route
You can select from different route alternatives
or change the route planning method after
you have selected a new destination.
1 Search for a location.
= For details, refer to Chapter 5.
The
“Route Summary” screen appears.
2 Touch [Alternatives].
You can see the details of route alternatives.
Touch any of them to see it on the map.
# If you cannot find a good alternative, touch
[
More Results] and scroll down for other alterna-
tive routes with different route planning methods.
3 Select one of the route alternatives and
touch [Select].
The previous screen returns.
4 Touch [Start Navigation].
Your navigation system starts the route gui-
dance.
Checking route alternatives for
an existing route
You can select another route and compare dif-
ferent route alternatives.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
3 Touch [Detours & Alternatives] then
[Alternative Routes].
The
“Alternative Routes” screen appears.
You can see details of route alternatives. Touch
any of them to see it on the map.
# If you cannot find a good alternative, touch
[
More Results] and scroll down for other alterna-
tive routes with different route planning methods.
4 Select one of the route alternatives and
touch [Select].
Setting a new starting position
for the route
For normal navigation, all routes are planned
from the current position. In order to check fu-
ture routes, simulate them or see their length
in time and distance, you can turn off the GPS
receiver. Then you can set the starting point of
the route to a different location than the cur-
rent GPS position.
1 Press the MAP button.
The Map screen appears.
2 Touch the following key.
Displays the navigation menu on
the Map screen.
3 Touch [Route Planner].
The
“Route Planner” screen appears.
4 Touch [Current GPS Position].
The pop-up menu appears.
5 Touch [Set Start Point].
A confirmation message appears.
Engb
39
Chapter
06
Checking
and
modifying
the
curre
nt
route
Checking and modifying the current route