Pioneer AVIC-F860BT - Manual (Page 28)

p The estimated time of arrival is an ideal
value calculated based on the value set for
“Max. Speed” and the actual driving
speed. The estimated time of arrival is only
a reference value, and does not guarantee
arrival at that time.
Configuring the driving
display
When navigating on multilane roads, you will
need to make sure to take the proper lane for
the recommended route.
If there is lane information available in the
map data, the navigation system will display
the lanes and corresponding directions of tra-
vel at the bottom of the map using small ar-
rows. Highlighted arrows represent the lane
and direction that you need to take for the re-
commended route.
Lane information
Signs display at the top of the map. Sign col-
ours and design styles are similar to those of
the actual signs in place above or along the in-
dicated roads. These signs display select desti-
nations and the road number of the road that
the relevant lane leads to.
If you are approaching a complex intersection
and the needed information exists, the map is
replaced with a 3D view of the junction.
Signposts
Junction view
p If the data for these items is not contained
in the map data, the information is not
available even if there are signs on the ac-
tual road.
An icon showing a petrol station or a restau-
rant will appear on the map during you are
driving on motorways. Touch the icon to open
the details of the next few exits or service sta-
tions.
p You can add any of them as a waypoint to
your route.
p If you want to display other types of POIs
for the exits, you can change the icons in
“Navigation Map”.
= For details, refer to “Navigation Map” set-
tings on page 51.
Engb
28
Chapter
04 How to use the map