Pioneer AVIC F900BT - Manual (Page 98)

1 Touch [BSM].
2 Touch [Start] to start
“BSM”.
BSM begins to flash. While BSM is flashing,
the six strongest broadcast frequencies will be
stored under the preset tuning keys [
P1] to
[ P6] in order of their signal strength. When
this is complete, BSM stops flashing.
p To cancel the storage process, touch
[ Stop].
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using [
P1] to [P6].
Limiting stations to regional
programming
When AF is used to automatically retune fre-
quencies, the regional function limits the se-
lection to stations broadcasting regional
programmes.
% Touching [Regional] switches between
[On] and [Off].
p Regional programming and regional net-
works are organised differently depending
on the country (i.e., they may change ac-
cording to the time, country or broadcast
area).
p The preset number may disappear on the
display if the tuner tunes in a regional sta-
tion that differs from the originally set sta-
tion.
p The regional function can be turned on or
off independently for each FM band.
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Touch [Local].
2 Touch [On] to turn local seek tuning on.
To turn local seek tuning off, touch [ Off].
3 Touch [cPrev] or [Nextd] to set the sen-
sitivity.
There are four levels of sensitivity for FM.
Level:
1
— 2 — 3 — 4
p The level “4” setting allows reception of only
the strongest stations, while lower settings
let you receive weaker stations.
Searching for an RDS station by
PTY information
You can search for general types of broadcast-
ing programmes.
= For details, refer to PTY list on page 101.
1 Touch cPrev or Nextd to select a pro-
gramme type.
There are four programme types:
News&INF
— Popular — Classics — Others
2 Touch [Start] to begin the search.
The tuner searches for a station broadcasting
that programme type.
p To cancel the search, touch [Stop].
p The programmes of some stations may dif-
fer from that indicated by the transmitted
PTY.
p If no station is broadcasting the type of pro-
gramme you searched for, Not Found is
displayed for about two seconds and then
the tuner returns to the original station.
Receiving PTY alarm broadcasts
PTY alarm is a special PTY code for announce-
ments regarding emergencies such as natural
disasters. When the tuner receives the radio
alarm code,
ALARM appears on the display
and the volume adjusts to the TA volume.
When the station stops broadcasting the
emergency announcement, the system re-
turns to the previous source.
p An emergency announcement can be can-
celled by touching [ Cancel].
p You can also cancel an emergency an-
nouncement by changing the source or
band.
Using the radio (FM)
Engb
98
Chapter
17