Pioneer AVIC F900BT - Manual (Page 45)

Editing waypoints
You can edit waypoints (locations you want to
visit on the way to your destination) and recal-
culate the route so that is passes through
these locations.
Adding a waypoint
1 Search for a location.
= For more details, refer to the descriptions
from page 25 to page 35.
2 Touch [Route...] on the
“Map Confirma-
tion Screen ”.
3 Touch [Add Via].
When no waypoint is set, route calculation
starts immediately.
= For more details concerning the operation,
refer to Sorting waypoints on this page.
p When you set waypoints in the route to your
destination, the route up to the next way-
point will appear in light green. The rest of
the route will appear in light blue.
Sorting waypoints
You can sort waypoints and recalculate the
route.
1 Touch [Destination] on the
“Top Menu”,
and then touch [Route Function].
2 Touch [Edit Route].
The
“Edit Route” screen appears.
3 Touch [i] or [j] to move the waypoint
or destination.
Put them in the desired order.
Touching [ Optimise] sorts the waypoints auto-
matically so that the route will compromise
the least time and distance.
4 Touch [Done].
The route is recalculated and the map of the
current position appears.
Deleting a waypoint
You can delete waypoints from the route and
then recalculate the route. (You can delete
waypoints successively.)
1 Touch [Destination] on the
“Top Menu”,
and then touch [Route Function].
2 Touch [Edit Route].
The
“Edit Route” screen appears.
3 Touch [Delete] on the right of the way-
point that you want to delete.
The waypoint will be deleted from the list.
4 Touch [Done].
The route is recalculated and the map of the
current position appears.
Storing the current route
Storing the current route allows you to recall
and set the stored route.
p This function is available only when the
route is set and your vehicle position is on
the route.
1 Touch [Destination] on the
“Top Menu”,
and then touch [Route Function].
Editing waypoints and the destination
Engb
45
Chapter
06
Editing
waypoints
and
the
destination