Pioneer AVIC F900BT - Manual (Page 137)

Nothing is displayed and the
touch panel keys cannot be
used.
The setting for the rear view camera
is incorrect. Select the appropriate setting for the rear
view camera.
The gearstick was placed in [R]
when the rear view camera was not
connected. Press MAP button, and then press MENU
button to return to the “Top Menu” and then
select the correct polarity setting for [ Back
Camera]. (Page 121)
There is no response when the
touch panel key are touched or
a different key responds. The touch panel keys deviate from
the actual positions that respond to
your touch for some reason. Perform the touch panel calibration. (Page
122)
Problems in the AV screen
Symptom Cause Action (See)
CD or DVD playback is not pos-
sible. The disc is inserted upside down. Insert the disc with the label upward.
The disc is dirty. Clean disc.
The disc is cracked or otherwise da-
maged. Insert a normal, round disc.
The files on the disc are an irregular
file format. Check the file format.
The disc format cannot be played
back. Replace disc.
The loaded disc is a type this system
cannot play. Check what type of disc it is. (For more cau-
tions about handling each type of media,
refer to Page 148.)
The screen is covered with the
caution message and the video
cannot be shown. The handbrake lead is not con-
nected or applied. Connect the handbrake lead correctly, and
apply the handbrake.
The handbrake interlock is acti-
vated. Park your vehicle in a safe place and apply
the handbrake.
No video output from connected
equipments.
No video output from connected
iPod. [ AV1 Input] or [AV2 Input] setting
is incorrect.
Establish the setting correctly. (Page 105)
The connection of the USB interface
cable for iPod is incorrect. Connect both USB plug and RCA cable side.
(If only either connection has made, iPod will
not works properly.) (Page 15)
The audio or video skips. The navigation system is not firmly
secured. Secure the navigation system firmly.
No sounds are produced.
The volume level will not rise. Cables are not connected correctly. Connect the cables correctly.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-Video. There is no sound during still, slow motion, or
frame-by-frame playback with DVD-Video.
The system is paused or performing,
fast reverse or forward during the
disc playback. For the media other than music CD (CD-DA),
there is no sound on fast reverse or forward.
The icon 9 is displayed, and op-
eration is not possible. The operation is not compatible
with the video configuration. This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
The picture stops (pauses) and
the navigation system cannot be
operated. The reading of data is impossible
during disc playback. After touching g once, start playback once
more.
Appendix
Engb
137
Appendix
Appendix