07 helpful information – Pioneer KRP-500M User Manual

Page 82

Helpful Information

Sound is wrong (one side
only or reversed between
left and right)

• Check if the speaker cable connections have been reversed between the left and right.

• Confirm that speaker cables are connected and seated properly.

• Check the sound balance and adjust if necessary.

Brightness and color
tone on the sides differ
from the center

• If images in 4:3 mode or letterbox images are displayed for long periods or for shorter

periods over several days, an after-image may remain due to burning.
Watch images in Full screen as much as possible to avoid this issue.

• Change the Brightness Sync. setting to Auto.

This function adjusts the brightness of the gray side masks for the brightness of the main
image.

• Use the Long Life Settings function (see “4.2.1 Extend Your Panel Life”)

Picture does not appear
properly

• Check the setting for Color Decoding when using INPUT 2 or INPUT 3 (pages 56 and 57).

• Check the setting for Signal Type.

• Check the setting for Video when using INPUT 5 through INPUT 6 (page 58).

• Check the setting for Signal Format when using INPUT 5 through INPUT 6 (page 58).

After-image lag

• If a bright or still image was on screen for a long period before switching to a darker

image, the original image may appear as an after-image or ghost. Try playing another
bright image, switching the picture quickly many times, or show a very active scene.

• Use the Long Life Settings function (see “4.2.1 Extend Your Panel Life”)

• Display the Video Pattern screen to help reduce after-image lag.

KURO LINK

Issue

Possible Solutions

KURO LINK does not
function

• Check the connections between the panel and the HDMI equipment.

• Confirm that the settings for the panel are correct.

• Confirm that the equipment is HDMI compliant.

• Confirm that settings for the equipment are correct.