Pioneer KRP-500M - Manual (Page 29)

29
En
Basic Picture and Sound Adjustment 04
Englis
h
3 ) Select an item to be adjusted.
Contrast is used in the example below.
4 ) Use the arrow buttons (
/ ) to adjust to the desired level.
5 ) Press HOME MENU again to exit the menu.
Picture Image Position
Each input source stores the picture adjustment settings for that view. Although repositioning is available in most
screen views, when the screen is set to Dot by Dot, the Position menu is unavailable. Also, depending on the
displayed video, the image position may not change after an adjustment.
To adjust the picture’s horizontal and vertical position, follow the steps below.
1 ) Access H.Position or V.Position through the Screen menu.
2 ) Adjust the vertical and/or horizontal positioning using the arrow buttons.
3 ) Press HOME MENU to exit the menu.
AV Selection : STANDARD
Contrast : 40
Brightness : 0
Color : 0
Tint : 0
Sharpness : 0
Color Temp : Mid
Red : 0
Green : 0
Blue : 0
Gamma : 3
Pro Adjust
Reset
Picture
Contrast 32
Auto Setup
H.Position
V.Position
Clock
Phase
Auto Size
Side Mask
Reset : No
KRP-600M_500M.book Page 29 Tuesday, May 13, 2008 12:47 PM