Pioneer AVIC-X3 - Manual (Page 83)

81
Ch
ap
te
r
6
U
sing
th
e A
V
S
o
ur
ce
(
B
u
ilt-
in
DVD Driv
e a
n
d
Ra
d
io
)
AV
2
Touch “Band” to select a band.
Touch “Band” repeatedly until the desired
band is displayed, FM1, FM2, FM3 for FM or
MW/LW.
3
To perform manual tuning, touch
or briefly.
The frequencies move up or down step by
step.
4
To perform seek tuning, keep touching
or for about one second and
release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception
is found.
You can cancel seek tuning by touching either
or briefly.
If you keep touching or you can
skip broadcasting stations. Seek tuning starts
as soon as you release the keys.
Switching between the detail
information display and the pre-
set list display
You can switch the left side of the basic screen
according to your preference.
1
Touch “Preset” (or “Detail”).
Each touch of “Preset” (or “Detail”) changes
the detail information display or preset list dis-
play.
Detail information display
Preset list display
Storing and recalling broadcast
stations
If you touch any of the preset tuning keys P1
(PRESET 1) – P6 (PRESET 6) you can easily store
up to six broadcast stations for later recall with
the touch of a key.
1
When you find a frequency that you want
to store in memory, keep touching a pre-
set tuning key P1 – P6 until the preset
number (e.g., P.CH 1) stops flashing.
The selected radio station has been stored in
memory.
❒
Up to 18 FM stations, 6 for each of the
three FM bands, and 6 MW/LW stations
can be stored in memory.
2
The next time you touch the same preset
tuning key P1 – P6, the radio station is
recalled from memory.
❒
You can also use 8 and 2 to recall radio
stations assigned to preset tuning keys P1
– P6.
Advanced radio operation
(1) Function display
➲
How to display the Function menu ➞
Page 69 to 70
Preset tuning keys (P1 – P6)
(1)
Ra
d
io
MAN-AVIC-X3-EN.book Page 81 Wednesday, June 6, 2007 10:15 AM