Pioneer AVIC-X3 - Manual (Page 24)

22
Ch
ap
te
r
1
Ba
sic
Op
er
at
ion
NA
V
I/
A
V
Setting the automatic open
function
When you do not wish the display to open/close
automatically, you can set the automatic open
function to the manual mode.
1
Press and hold the OPEN/CLOSE button.
The angle adjustment screen appears.
2
Touch “Auto Flap”.
Each touch of the “Auto Flap” changes the
settings as follows:
• Manual – You have to press the OPEN/
CLOSE button to open/close the display
• Auto – The display automatically opens/
closes when power to navigation system is
turned on
Protecting Your Product from
Theft
The front panel can be detached from the display
unit to discourage theft, as described below.
Important:
• Never grip the display and the buttons tightly
or use force when removing or attaching.
• Avoid subjecting the front panel to excessive
shocks.
• Keep the front panel out of direct sunlight and
high temperatures.
• After detaching the front panel, keep it in a
safe place so it is not scratched or damaged.
Removing the front panel
1
Press the DETACH button to remove the
front panel.
2
Gently grip the right side of the front
panel and slowly pull it outward.
Take care not to drop the front panel and pro-
tect it from contact with water or other fluids
to prevent permanent damage.
Attaching the front panel
1
Replace the front panel by holding it
upright to this product and clipping it
securely into the mounting hooks.
MAN-AVIC-X3-EN.book Page 22 Wednesday, June 6, 2007 10:15 AM