Pioneer AVIC-X3 User Manual

Page 105

103

Ch
ap

Usin

e A

e (P
io

r A

Bluetooth Audio

Listening to songs on BT Audio

(Bluetooth audio player)

If you connect a Bluetooth adapter (e.g.
CD-BTB200) (sold separately) to this unit, you can
control a Bluetooth audio player via Bluetooth
wireless technology. For details concerning oper-
ation, refer to the Bluetooth adapter’s operation
manual. This section provides brief information
on Bluetooth audio player operations with this
unit that slightly differs or is cut short from the
operations described in the Bluetooth adapter’s
operation manual.

❒

Even if your audio player does not contain a
Bluetooth module, you can still control it from
this unit via Bluetooth wireless technology. To
control your audio player by using this unit,
connect a product featuring Bluetooth wire-
less technology (available on the market) to
your audio player and connect Bluetooth
adapter (e.g. CD-BTB200) to this unit.

❒

Depending on the Bluetooth audio player con-
nected to this navigation system, the available
operations with this navigation system are
limited to the following two levels:

– Lower level: Only playing back songs on your

audio player is possible.

– Higher level: Playing back, pausing, select-

ing songs, etc., are possible (all the opera-
tions illustrated in this manual).

❒

Since there are a number of Bluetooth audio
players available on the market, operations
with your Bluetooth audio player using this
navigation system vary greatly in range.
Please refer to the instruction manual that
came with your Bluetooth audio player as well
as this manual while operating your player on
this navigation system.

❒

Information about songs (e.g. the elapsed
playing time, song title, song index, etc.) can-
not be displayed on this navigation system.

❒

While you are listening to songs on your Blue-
tooth audio player, please refrain from operat-
ing your mobile phone as much as possible. If
you try operating on your mobile phone, the
signal from your mobile phone may cause a
noise on the song playback.

❒

When you are talking on the mobile phone
connected to this navigation system via Blue-
tooth wireless technology, the song playback
from your Bluetooth audio player connected
to this navigation system is muted.

❒

Even if you switch to another source while lis-
tening to a song on your Bluetooth audio
player, the playback of song continues to
elapse.

❒

Depending on the Bluetooth audio player you
connected to this navigation system, opera-
tions on this navigation system to control the
player may differ from those explained in this
manual.

(1) Source icon
(2) Device name

Touching “Name” switches between equip-
ment name and BD address.

Touch “BT-AUDIO” in the AV Source
screen to select the Bluetooth audio
source.
➲

“Selecting an AV source” ➞ Page 28

❒

For this navigation system to control your
Bluetooth audio player it needs to estab-
lish a Bluetooth wireless connection.
(Refer to “Connecting a Bluetooth audio
player” on page 104.)

Touch 6.
Playback starts.

To skip back or forward to another track,
touch 7 or 9.
Touching 9 skips to the start of the next
track. Touching 7 once skips to the start of
the current track. Touching it again will skip to
the previous track.

(1)

(2)

BT
-A

MAN-AVIC-X3-EN.book Page 103 Wednesday, June 6, 2007 10:15 AM