Pioneer AVIC-X3 - Manual (Page 117)

115
Ch
ap
te
r
8
Cu
st
o
m
isin
g t
h
e A
V
S
ou
rc
e S
et
tin
g
AV
❒ When DVD is selected, the following
restrictions are applied to “Rear display”.
– When a CD or MP3 disc is set in the built-in
DVD drive, nothing is output.
❒
When AV1/AV2 is selected, the following
restrictions are applied to “Rear display”.
– The “Video image” and sound are output
only when the AV-1/AV-2 has both video and
sound.
– The “Video image” and sound are output
only when the appropriate setting on “AV1
Input” / “AV2 Input”.
Setup adjustments
(1) System menu display
➲
How to display the System menu ➞ Page 69
Setting the video input
You can switch the setting according to the con-
nected component.
❒ Select “Video” to watch video of a connected
component as AV-1 or AV-2 source.
1
Touch “AV1 Input” or “AV2 Input” in the
System menu.
Each touch of the “AV1 Input” or “AV2
Input” changes the settings as follows:
AV1 Input:
• Off – No video component is connected
• Video – External video component
• EXT – Pioneer external unit connected with
RCA video cable
• M-DVD – DVD player or Multi-DVD player
connected with IP-BUS cable
❒ When a DVD player or Multi-DVD player is
connected with IP-BUS cable and RCA
video cable, select “M-DVD”. When the AV
source is “M-DVD”, the “Video image” of
the DVD player or Multi-DVD player can be
displayed.
AV2 Input:
• Off – No video component is connected
• Video – External video component
❒
When a Pioneer external unit is connected
with an IP-BUS cable, select EXT. When
the audio source is EXT, the “Video
image” of the Pioneer external unit can be
displayed.
❒ Use AV2 Input when connecting CD-
RM10 (sold separately) through the exter-
nal video component.
Setting for rear view camera
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC2). (For details,
consult your dealer.)
Camera for backing up
The navigation system features a function that
automatically switches to the full-screen rear
camera image installed on your vehicle. When
the gearstick is in the REVERSE (R) position, the
screen automatically switches to full-screen rear
view camera.
Camera for Rear view mode
Rear View can be displayed at all times (e.g.
when monitoring an attached trailer, etc.) as a
split screen where map information is partially
displayed. Please be aware that in this setting,
camera image is not resized to fit, and that a por-
tion of what is seen by the camera is not view-
able.
• Pioneer recommends the use of a camera
which outputs mirror reversed images,
otherwise screen image may appear
reversed.
• Immediately confirm whether the display
changes to a rear view camera image when the
gearstick is moved to REVERSE (R) from
another position.
• When the whole screen changes to a rear view
camera image during normal driving, switch to
another setting.
❒ Initially, this function is set to Off.
(1)
Ot
he
r F
u
n
ct
ion
s
MAN-AVIC-X3-EN.book Page 115 Wednesday, June 6, 2007 10:15 AM