The advanced mcacc menu 07, Renaming mcacc presets, Copying mcacc preset data – Pioneer SC-LX81 User Manual
Page 55: Clearing mcacc presets
The Advanced MCACC menu
07
55
En
Renaming MCACC presets
If you have several different MCACC presets that you’re
using, you may want to rename them for easier
identification.
1
Select ‘Memory Rename’ from the Data
Management setup menu.
2
Select the MCACC preset you want to rename, then
select an appropriate preset name.
Use
/ to select the preset, then / to select a
preset name.
3
Repeat for as many MCACC presets as necessary,
then press RETURN when you’re finished.
You will return to the
Data Management setup menu.
Copying MCACC preset data
If you want to manually adjust the Acoustic Calibration
EQ (see
Manual MCACC setup on page 47), we
recommend copying your current settings
1
to an unused
MCACC preset. Instead of just a flat EQ curve, this will
give you a reference point from which to start.
1
Select ‘MCACC Memory Copy’ from the Data
Management setup menu.
2
Select the setting you want to copy.
•
All Data – Copies all the settings of the selected
MCACC preset memory.
•
Level & Distance – Copies only the channel level and
speaker distance settings of the selected MCACC
preset memory.
3
Select the MCACC preset you’ll be copying the
settings ‘From’, then specify where you want to copy
them (‘To’).
Make sure you don’t overwrite an MCACC preset you’re
currently using (this can’t be undone).
4
Select ‘OK’ to confirm and copy the settings.
When
MCACC Memory Copy? is displayed, select YES.
If
NO is selected, the memory is not copied.
Completed! shows in the OSD to confirm the MCACC
preset has been copied, then you automatically return to
the
Data Management setup menu.
Clearing MCACC presets
If you are no longer using one of the MCACC presets
stored in memory, you can choose to clear the calibration
settings of that preset.
1
Select ‘MCACC Memory Clear’ from the Data
Management setup menu.
2
Select the MCACC preset you want to clear.
Make sure you don’t clear an MCACC preset you’re
currently using (this can’t be undone).
3
Select ‘OK’ to confirm and clear the preset.
When
MCACC Memory Clear? is displayed, select YES.
If
NO is selected, the memory is not cleared.
Completed! shows in the OSD to confirm the MCACC
preset has been cleared, then you automatically return to
the
Data Management setup menu.
Note
1 The settings made in
Automatically setting up for surround sound (MCACC & Full Band Phase Control) on page 9 or Automatic MCACC (Expert)
on page 45.
a. Memory Rename
b. MCACC Memory Copy
c. MCACC Memory Clear
3.Data Management
A/V RECEIVER
Exit
Return
MCACC Position Rename
M1 :
MEMORY
1
3a.Memory Rename
M2 :
MEMORY
2
M3 :
MEMORY
3
M4 :
MEMORY
4
M5 :
MEMORY
5
M6 :
MEMORY
6
A/V RECEIVER
Exit
Finish
a. Memory Rename
b. MCACC Memory Copy
c. MCACC Memory Clear
3.Data Management
A/V RECEIVER
Exit
Return
Copy :
All
Data
From : M1.MEMORY
1
3b.MCACC Memory Copy
To :
M1.MEMORY
1
OK
A/V RECEIVER
Exit
Cancel
a. Memory Rename
b. MCACC Memory Copy
c. MCACC Memory Clear
3.Data Management
A/V RECEIVER
Exit
Return
Clear : M1.MEMORY
1
3c.MCACC Memory Clear
OK
A/V RECEIVER
Exit
Cancel
SCLX81_71.book Page 55 Monday, June 2, 2008 6:16 PM