Pioneer SC-LX81 - Manual (Page 119)

Additional information 15
119
En
About status messages
Refer to the following information when you come up with a status message while operating the Home Media Gallery.
Meaning of messages displayed when the HDMI control function is set to ON
The Home Media Gallery
cannot be operated with
the buttons on the remote
control. The remote control is not currently set to the
Home Media Gallery mode. Press HOME MEDIA GALLERY to set the
remote control to the Home Media Gallery
mode.
74
Status messages Descriptions
Please Wait A component on the network, including a PC, is currently being connected. Wait for a while.
Connection Down The selected category or Internet radio station cannot be accessed.
File Format Error Cannot be played back for some reasons.
Track Not Found The selected song has not been found anywhere on the network.
Server Error The selected server cannot be accessed.
Server Disconnected The server has been disconnected.
USB Error 1 The amount of electricity consumption for a USB memory device is too large.
empty There are no files stored in the selected folder.
Preset Not Stored The selected Internet radio station is not currently registered and saved.
Network Problem There is a problem with the network settings. Check the network settings. The message also
appears then the network settings of this receiver have been changed. In this case, please
wait.
Out of Range The value entered is beyond the permitted range of the network settings.
License Error The license for the contents to be played back is invalid.
Item Already Exists This is displayed when the file you have attempted to register in the Favorites folder has
already been registered.
Favorite List Full This is displayed when you have attempted to register a file in the Favorites folder but the
Favorites folder is already full.
Message (error number) Problem Remedy
HDMI C ERR 110 to 190
HDMI C ERR 1A0
HDMI C ERR 1B0
HDMI C ERR 1C0
HDMI C ERR 2C0
HDMI cable is not properly connected. • Check the connection.
• There may be a broken wire in the cable.
• This receiver or connected components may be
damaged.
Symptoms Causes Remedies Refer to
SCLX81_71.book Page 119 Monday, June 2, 2008 6:16 PM