Pioneer SC-LX81 - Manual (Page 34)

Controls and displays 04
34
En
12 Number buttons and other receiver/component
controls
Use the number buttons to directly select a radio
frequency (page 41) or the tracks on a CD, DVD, etc.
ENTER can be used to enter commands for TV or DTV.
After set the remote control operation switch to RCV:
SIGNAL SEL – Use to select an input signal (page 38).
SLEEP – Use to put the receiver in sleep mode and
select the amount of time before sleep (page 97).
DIMMER – Dims or brightens the display (page 97).
SR+ – Switches the SR+ mode on/off (page 69).
SBch – Use to select the surround/virtual surround
back channel mode (page 39).
MCACC – Press to switch between MCACC presets
(page 38).
A.ATT – Attenuates (lowers) the level of an analog
input signal to prevent distortion (page 97).
GENRE – Automatically selects the most appropriate
Advanced Surround mode for the genre of the source
currently being played back (this feature is available
only when a Pioneer DVD recorder supporting HDMI
Control is connected to this receiver via HDMI)
(page 40).
SC-LX81 only: HDMI OUT – Switch the HDMI output
terminal (page 98).
Press TUNER first to access:
D.ACCESS – After pressing, you can access a radio
station directly using the number buttons (page 41).
CLASS – Switches between the three banks (classes)
of radio station presets (page 41).
13 SOURCE 
Press to turn on/off other components connected to the
receiver (see page 100 for more on this).
14 Remote control illumination button
Press to turn on/off the illumination of some of the
buttons and the LCD light.
1
15 Remote control operation selector switch
Set to
RCV to operate the receiver, TV or SOURCE to
operate the TV or the source device.
When this switch is set to RCV, the receiver can be
controlled (used to select the white commands above the
number buttons (
A.ATT, etc.)). Also use this switch to set
up surround sound (page 9, page 44).
16 VOL +/–
Use to set the listening volume.
17 MUTE
Mutes the sound or restores the sound if it has been
muted (adjusting the volume also restores the sound).
Note
1 • They also light when buttons are operated or the remote control operation selector switch is switched.
• Press and hold in the remote control illumination button for 5 seconds to enable/disable the illumination function.
SCLX81_71.book Page 34 Monday, June 2, 2008 6:16 PM