Selecting the focusing area z [af mode – Olympus TG3 User Manual
Page 43
43
EN
43
EN
For the operation method, refer to (P. 41).
Brightening the subject against backlight z [Shadow Adjust]
Submenu 2
Application
Auto
Automatically On when a compatible shooting mode is selected.
Off
The effect is not applied.
On
Shoot with automatic adjustment to brighten an area that has
become darker.
• When [ESP/n] is set to [n], [Shadow Adjust] is automatically fixed to [Off].
Selecting the focusing area z [AF Mode]
Submenu 2
Application
Face/iESP
The camera focuses automatically. (If a face is detected, it is
shown by a white frame
*1
; when the shutter button is pressed
halfway and the camera focuses, the frame turns to green
*2
. If no
face is detected, the camera chooses a subject in the frame and
focuses automatically.)
Spot
The camera focuses on the subject located within the AF target
mark.
AF Tracking
The camera tracks the subject movement automatically to focus
on it continuously.
*1 For some subjects, the frame may not appear or may take some time to
appear.
*2 If the frame blinks in red, the camera cannot focus. Try refocusing on the
subject.
To focus on a moving subject continuously (AF Tracking)
1
Hold the camera to align the AF target mark on the subject and press the
A
button.
2
When the camera recognizes the subject, the AF target mark automatically
tracks the subject movement to focus on it continuously.
3
To cancel the tracking, press the
A button.
• Depending on the subjects or the shooting conditions, the camera may be
unable to lock the focus or fail to track the subject movement.
• When the camera fails to track the subject movement, the AF target mark
changes to red.