Olympus TG3 - Manual (Page 38)

38 EN
ISO sensitivity Sets the ISO sensitivity.
l ISO Auto
The camera automatically sets the sensitivity with
priority on image quality.
m
High ISO
Auto
The camera automatically sets the sensitivity with
priority on minimizing blur caused by a moving subject
or by camera shake.
Q to # Value
Set a smaller value to reduce noise in the picture, or a
larger value to reduce blur.
o/ Y
Sets the sequential shooting function and the time
from pressing the shutter button until the picture
is taken.
o Single
One frame is shot each time the shutter button is
pressed.
j Sequential
The images are taken sequentially for 100 frames at up
to about 5 frames per second (fps) while pressing down
the shutter button all the way down.
c High-Speed1
The images are taken sequentially for up to 100 frames
at about 15 frames per second (fps) while pressing
down the shutter button all the way down.
d High-Speed2
The images are taken sequentially for up to 100 frames
at about 60 frames per second (fps) while pressing
down the shutter button all the way down.
Y12 Y 12 sec
The self-timer lamp turns on for approx. 10 seconds,
then blinks for approx. 2 seconds, and then the picture
is taken.
Y2 Y 2 sec
The self-timer lamp blinks for approx. 2 seconds, then
the picture is taken.
YC
Custom
Self-timer
Photographs are taken at “the number of frames, the
time from pressing the shutter button until the picture is
taken, and the interval time” which you set.