Olympus TG3 - Manual (Page 25)

25 EN
s Panorama
When shooting a panorama, you can select the method of combining
images using the submenu.
1 Select [ s Panorama].
2 Press G to go to the submenu.
3 Use HI to select a submenu, and press the A button to set.
Submenu Application
Auto
Panorama images are automatically combined just by
swinging the camera in the shooting direction.
Manual
Three frames are taken and combined by the camera.
The user composes the shots using the guide frame and
manually releases the shutter.
PC
The frames that were taken are combined into a
panorama image using the PC software.
• Move the camera as if rotating it around a vertical axis through the center
of the lens to take better panorama images.
Taking pictures with [Auto]
1
Press the shutter button to take the first frame.
2 Move the camera slightly in the
direction of the second frame.
3 Move the camera slowly so that
the pointer and the target mark
overlap. The camera releases the
shutter automatically when the
pointer and the target overlap.
• To combine only two frames,
press the A button.
AUTO AUTO
MENU OK Save Cancel
SCN SCN s
Target mark
Pointer
Screen when combining
images from left to right
4 Repeat step 3 to take a third frame. The camera automatically combines the
frames into a single panorama image.
• To cancel the panorama function, press the  button.
• If the shutter does not automatically release, try [Manual] or [PC].