Olympus E-20N - Manual (Page 80)

78
Using the IS (Interlace Scan) Mode
This is the normal shooting mode in which the camera operates and uses the
mechanical shutter. With a mechanical shutter, the shutter speed can be adjusted up to
1/640 sec. An ND filter may be required with the aperture wide open in bright light. In the
IS mode the maximum resolution (4.95 effective megapixels) of the CCD is possible.
1
Press the menu button .
The menu is displayed on the monitor.
2
On the arrow pad, press or
to move the green highlight to
(or
/ ).
(To jump to the above icon, press first.)
3
On the arrow pad, press to
move the green highlight to IS
mode.
1
3
2