Olympus E-20N - Manual (Page 142)

140
4
3
5
Using the macro button to select close up photography
with a conversion lens .
With the factory mode settings, the camera cannot be set in the conversion lens mode by
holding down the macro button
and rotating the main dial, so follow the procedure
below to set the camera for taking close-up pictures with a conversion lens.
1
Set the mode dial to the setup/
connection mode
.
2
Press the menu button .
The menu is displayed on the monitor.
3
On the arrow pad, press to
move the green highlight to the
right.
4
On the arrow pad, press to
move the highlight to the macro
mode/conversion lens mark
.
If you are not using a conversion lens,
press
to move the highlight to the
macro mark .
5
Press the button to select the
setting.
The green highlight returns to the macro
mark
.
Press button again to close the menu.
Using an Optional Conversion Lens (continued)