Olympus E-20N - Manual (Page 20)

18
4
4
Remove the battery holder.
5
Insert a battery into the battery
holder as shown in the illustration.
6
Gently press down on the battery
in the direction of the arrow until
you hear it lock in place.
If you accidentally insert the battery
reversed, you will not be able to fully insert
it. In this case, remove it and insert it
correctly.
7
Using the same procedure, insert
another battery in the other side of
the battery holder.
8
Insert the battery holder (with the
batteries inserted) into the camera.
9
Gently push in the holder while
turning the battery compartment
knob to the closed
position.
Finally, fold down the battery
compartment knob.
If you want to start taking pictures
now, go on to the next chapter.
(
➞ 23)
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Caution
• Do not insert the battery holder into the
camera with a battery loaded in only one side.
The battery holder may not be removed.
Inserting Batteries and Attaching the Optional AC Adapter (continued)
Do not remove
the seal.
If insulation seal
is attached, peel
it off.
5
8
9
6
7
Battery holder