Olympus E-20N - Manual (Page 24)

22 22
• If a malfunction occurs
If you notice that the AC adapter body or power cord is extremely hot, or if you notice any unusual
odors or smoke around the AC adapter, unplug the AC adapter power cord from the power source
immediately. Contact your dealer or an Olympus service center for assistance.
Frequently inspect the AC adapter power cord. If you notice that the cable covering or plug is
damaged in any way, immediately contact your dealer or an Olympus service center.
• Connecting and disconnecting the AC adapter
Always make sure that the camera is switched off before you connect/disconnect the AC adapter
to/from the camera. Never handle the AC adapter power cord with wet hands.
When connecting the AC adapter, (1) first plug the AC adapter power cord into the power outlet,
(2) connect the other end of the power cord to the DC IN jack on the camera, and then (3) switch
the camera on. Make sure that the power cord is securely plugged into the power outlet.
To disconnect the AC adapter, switch the camera off, disconnect the power cord from the camera,
and then unplug the power cord from the power supply. Grip the AC adapter, not the cord, when
you unplug it. Never twist, bend, or pull on the power cord.
Always unplug the AC adapter from the power outlet when the camera is not in use.
Inserting Batteries and Attaching the Optional AC Adapter (continued)