Xerox iGen4 Digital Press con Xerox EX Print Server Powered by Fiery-16492 - Manual (Page 6)

Page 6
Printing to EX Print Server Server using the FreeFlow Job Submission option
If you are using FreeFlow Job Submission options, select the EX Print Server’s Print queue in
order to receive the expected result.
The following table describes the result when FreeFlow is connected to the different
EX Print Server queues.
Cancelling jobs
Cancelling a job from FreeFlow Status does not cancel the job at the EX Print Server. As a
workaround, cancel the job from Command WorkStation.
Printing covers
Back covers do not print when you choose to print a range of pages from a job. To print both
a front and back cover, you must print the entire job.
Autofit and Tabloid jobs
Autofit and Tabloid jobs (for example, A3 and SRA3) submitted from FreeFlow Makeready
are shifted up and to the left, resulting in clipped images.
EX Print Server queue Setting Outcome
Print queue Print Job is printed and saved in the Printed queue
Save Job is processed and held in raster format in the
EX Print Server, but not printed
Print and Save Job is printed and saved in its non-raster format in
the Printed queue
Direct queue Print Job is printed and not saved
Save Job is saved and not printed
Print and Save Job is printed and saved
Hold queue Print Job is sent to the Hold queue and saved in non-
raster format, but not printed
Save Job is sent to the Hold queue and saved in non-
raster format, but not printed
Print and Save Job is sent to the Hold queue and saved in non-
raster format, but not printed