Xerox iGen4 Digital Press con Xerox EX Print Server Powered by Fiery-16492 - Manual (Page 5)

Page 5
DFA profiles
DFA profiles on the EX Print Server are supported in FreeFlow. You can access the DFA
profiles on the EX Print Server from Custom Finishing in FreeFlow.
DFA profiles are defined in the EX Print Server as:
• Custom 1
• Custom 2
• Custom 3
• Custom 4
The DFA profiles must be programed exactly as defined above in FreeFlow's Custom
Finishing.
N OTE : The profiles must be programmed at the digital press. For more information, see the
documentation that accompanies the digital press and DFA device.
If you add an additional DFA profile, the new profile is displayed as “None” on the
EX Print Server. If no profile is required, FreeFlow Print Manager uses the Printer’s Default
profile.
Access the DFA Profiles on the EX Print Server from Custom Finishing in FreeFlow.
Using EX Print Server FreeForm Masters from FreeFlow
To use an EX Print Server FreeForm Master from FreeFlow, perform the following steps:
1 Select Background Form on the FreeFlow Image Adjustment tab.
2 Type the FreeForm number, as assigned on the EX Print Server, in the Form Name dialog box.