Xerox iGen4 Digital Press con Xerox EX Print Server Powered by Fiery-16492 - Manual (Page 3)

Page 3
Setting the print
path Use the following procedure to set up a FreeFlow application to print to the EX Print Server.
T O SET UP A F REE F LOW APPLICATION TO PRINT TO THE EX P RINT S ERVER
1 From the FreeFlow Printer Registration application, select Add.
The Add Printer Wizard dialog box appears.
2 Enter the IP address of the EX Print Server and click Identify Configuration to automatically
detect the Printer Model and the Controller/Server Type.
N OTE : If the network cannot automatically detect the digital press and EX Print Server, do the
following:
• Select Xerox iGen4 90/110 Press from the Printer Model list.
• Select Xerox EX Print Server 1.0 IPP from the Print Controller/Server Type list.
• Follow the Printer Registration instructions to complete the printer installation.
Tab printing
Tab printing
Tab printing is supported for both full-cut and precut tabs. Precut tabs are supported for both
Page Inserts and Exception Pages. When used for Page Inserts, they map to the
EX Print Server Insert Tab feature found under Mixed Media. When used for Exception
Pages, they map to the EX Print Server Page Range feature found under Mixed Media.
For information about using Mixed Media, see Command WorkStation Additional
Information in Utilities, which is part of the user documentation set.
Printing RDO files that contain precut tabs
The Fiery patch 1-1301PH is a requirement for printing jobs that contain tabs. In order for
this feature to work, you must install the patch, which can be downloaded to the
EX Print Server from System Updates or WebTools.
The EX Print Server supports precut tabs in FreeFlow applications such as Makeready. To
ensure that the text prints on tabs, send the job directly to the EX Print Server without
previewing it in Command WorkStation or changing the settings in Job Properties.
If the print job is sent as an RDO (raster document object) file, or processed through Xerox
PostScript conversion, the size is not predefined, but the job prints correctly.
N OTE : Tabs must be programmed as 9 x 11-inch precut tabs, not 8.5 x 11-inch.