Xerox 4112-4127 ST con Xerox EX Print Server powered by Fiery-15679 - Manual (Page 2)

Page 2
Installation Obtaining the FreeFlow enablement file
The FreeFlow enablement file is available from System Updates, WebTools, or
www.xerox.com.
The enablement file applies to the entire suite of FreeFlow applications, which includes
FreeFlow Express to Print, Makeready, Process Manager, Web Services, Print Manager, and
Output Manager version 7.0 SP3.
Installing the FreeFlow enablement file
You can apply the enablement file directly through System Updates. If you obtain the file
from WebTools or the Xerox web site, use the following procedure to download the file to
the Fiery.
T O OPEN THE . EXE FILE
1 Make sure that Fiery version 2.5 system software is installed.
2 Double-click the Zip file to extract the 1-12UVFX.exe file to a computer on the same network
as the Fiery.
3 Double-click 1-12UVFX.exe to start the download.
4 Select 1-12UVFX.exe and click Next.
5 Click Accept for the license agreement.
T O INSTALL THE F REE F LOW ENABLEMENT FILE WITH THE F IERY P ATCH D OWNLOADER
1 Double-click the 1-12UVFX.exe file.
The Fiery Patch Downloader application starts.
2 Click Next.
The License Agreement window appears.
3 Click Accept.
The Logon dialog box displays.
4 Type “admin” and enter the administrator password.
5 Type the Fiery IP address or Fiery server name for the Hostname.
6 Click Connect.
The Server Information window appears.
7 Click Download.
The file 1-12UVFX.exe is extracted and downloaded.
8 Click Next.