Xerox DocuColor 242-252-260 con built-in Fiery controller-14683 - Manual (Page 8)

Page 8
PCL print jobs cannot be set on the Fiery over IPP (Internet Printing Protocol)
PCL files that contain job programming are not supported by the Fiery from FreeFlow.
If job programming is required for your job, use the Fiery PCL printer driver.
FreeFlow Job Submission option
The FreeFlow Job Submission option is not available in FreeFlow Print Manager, version 8.0.
Production print path
The FreeFlow production print path supports the following job formatting options for TIFF,
RDO, and JPEG file formats:
• Orientation
• Page Layout
• Reduce/Enlarge
• Rotation
To achieve similar results for PDF and PostScript files, send the job to the Fiery Hold
queue and use Command WorkStation Job Properties to select similar options.
Black-and-white image quality when scanning
When sending a black-and-white scan job imported from FreeFlow Makeready and printed
from FreeFlow Print Manager - Advanced Print Path, for the best printed result, turn off
ColorWise before sending the scan job.
To turn off ColorWise in FreeFlow, select Image Quality > Output Color, and then set
CMYK Emulation to ColorWise OFF.
To turn off ColorWise in Command WorkStation, click the Color tab, click Expert Settings,
and then set CMYK Simulation Profile to ColorWise OFF.
Printing a collated job with slip sheets
A collated job with Slip Sheets fails to print. To correct this issue, install the Fiery server
patch 1-135XBM.
Reprinting Raster Document Object jobs from Command WorkStation
Reprinting an RDO job from Command WorkStation causes a Load Paper condition.
To correct this issue, install the Fiery server patch 1-13O62N.
Printing Z Fold 1/2 Sheet Left Bind
When you print Z Fold 1/2 Sheet Left Bind combined with center stapling, hole punch, or
2 staple, the job arrives at the Fiery correctly, but prints without the staple or hole punch.