Xerox DocuColor 242-252-260 con built-in Fiery controller-14683 - Manual (Page 4)

Page 4
Latest features Spot Color Matching
The FreeFlow enablement supports Spot Color Matching. With the Spot Color Matching
print option, you can determine how spot colors are printed at the Fiery:
• Spot Color Matching On uses color tables built into the Fiery to simulate the spot color
with the closest equivalent available using the CMYK toners of the copier connected to the
Fiery. If your Fiery supports the Spot-On application in ColorWise Pro Tools, you can
customize the spot color definitions used by ColorWise.
• Spot Color Matching Off instructs the Fiery to simulate the spot color using CMYK
equivalents defined by the spot color manufacturer. These are the same CMYK values used
by applications that include spot color libraries. This CMYK combination is then printed
with the CMYK Simulation setting you choose, such as SWOP or DIC.
Virtual printers
The FreeFlow enablement supports Fiery Virtual Printers, which allow you to print to the
Fiery using predefined settings saved as a special print queue. The Fiery administrator can
create virtual printers and publish them so that users can access them on the network. For
information about using virtual printers, see Command WorkStation Additional Information
in Utilities, which is part of the user documentation set.
N OTE : After you create a new Fiery Virtual Printer, you must restart the Fiery to register the
new virtual printer with FreeFlow Print Path.
Tab printing
Tab printing
Tab printing is supported for both full-cut and precut tabs. Precut tabs are supported for both
Page Inserts and Exception Pages. When used for Page Inserts, they map to the Fiery Insert
Tab feature found under Mixed Media. When used for Exception Pages, they map to the
Fiery Page Range feature found under Mixed Media.
For information about using Mixed Media, see Command WorkStation Additional
Information in Utilities, which is part of the user documentation set.
Printing Raster Document Object files that contain precut tabs
The Fiery supports precut tabs in FreeFlow applications such as Makeready. To ensure that
the text prints on tabs, send the job directly to the Fiery without changing the settings in Job
Properties.
If the print job is sent as an RDO (raster document object) file, or processed through Xerox
PostScript conversion, the size is not predefined, but the job prints correctly.
N OTE : Tabs must be programmed as 9 x 11-inch precut tabs, not 8.5 x 11-inch.