Xerox DocuColor 242-252-260 con built-in Fiery controller-14683 - Manual (Page 5)

Page 5
N OTE : The file must be saved with the .RDO extension. If you override the job name found
in Job Notes, make sure that the job name ends with the .RDO extension. An RDO file that
contains precut tabs must print to the Fiery Print queue or Hold queue.
Limitations and
workarounds Stapling Landscape jobs
Certain staple settings for Landscape jobs staple in the opposite corner than you specify when
printing to the copier from a Fiery IPP print path, as follows:
• 1 Staple - Top Right Landscape prints out as 1 Staple - Top Left Landscape
• 1 Staple - Top Left Landscape prints out as 1 Staple - Top Right Landscape
To avoid this, from FreeFlow, select:
• 1 Staple - Top Right Landscape to staple the upper-left corner of the Landscape page
or select:
• 1 Staple - Top Left Landscape to staple the upper-right corner of the Landscape page
To staple Landscape jobs of all paper sizes correctly from FreeFlow applications, send the job
to the Fiery Hold queue and change the job’s Orientation to Landscape at the Fiery before
releasing to print. For details, see the following table.
FreeFlow Print Manager
staple options Command
WorkStation
staple options Staple Position for Landscape
jobs with Orientation
set to OFF
(Orientation is set to OFF for all
jobs sent from FreeFlow Print
Manager)
Staple Position for Landscape
jobs with Orientation
set to Landscape
(Select Landscape for Orientation
from Command WorkStation
Job Properties)
1 Staple - Top Left Landscape Left Top Single
1 Staple - Top Right Landscape Right Top Single
2 Staples - Left Portrait Left Double Does not staple