Xerox DocuColor 242-252-260 con built-in Fiery controller-14683 - Manual (Page 2)

Page 2
Before printing Before printing to the Fiery, verify the following:
• The FreeFlow IPP enablement file is installed on the Fiery. To verify enablement,
print a Configuration page and verify that the Update Information section includes
the file name: 1-13LK3J.
For information about printing a Configuration page, see Configuration and Setup.
For instructions on downloading and installing the FreeFlow enablement file, see
“Installation” on page 3.
• Fiery software is installed on the client workstation. For instructions on installing and
using the Fiery, see the documentation that accompanies the server.
• FreeFlow Express to Print, Makeready, Process Manager, Web Services, Print Manager,
or Output Manager, version 8.0 are installed on the FreeFlow system.
Setting the print path
Use the following procedure to set up a FreeFlow application to print to the Fiery.
T O SET UP A F REE F LOW APPLICATION TO PRINT TO THE F IERY
1 From the FreeFlow Printer Registration application, select Add.
The Add Printer Wizard dialog box appears.
2 Enter the IP address of the Fiery and click Identify Configuration to automatically detect the
Printer Model and Controller/Server Type.
N OTE : If the network cannot automatically detect the copier and Fiery, do the following:
• Select DocuColor 242/252/260 from the Printer Model list.
• Select Integrated Fiery Color Server 2.0 IPP from the Print Controller/Server Type list.
• Follow the Printer Registration instructions to complete the printer installation.