Xerox Stampante DocuColor 12 con Fiery EX12-14994 - Manual (Page 3)

Page 3
XC 701P41810 (EFI Part Number: 45042719)
Installing Command WorkStation
When you install Command WorkStation version 4.1.0.37, an error message may appear
that recommends that you upgrade from Internet Explorer 5 to Internet Explorer 6. The
Fiery EX12 version 2.0 SP2 update includes Internet Explorer 5. We recommend that you
upgrade to the latest version of Internet Explorer, which is available on the Microsoft web
site.
Fiery EX12 Password
The Windows NT system password for the Fiery EX12 is no longer blank. It has been set
initially to
Fiery.1 Change this password immediately after you install and configure your
Fiery EX12.
To change the Fiery EX12 Windows NT password from Windows NT 4.0/2000/XP
clients:
1. Log in as Administrator and press CTRL+ALT+DELETE to display the Windows NT
Security window.
2. Click Change Password and specify all of the following information:
User Name : Administrator
Domain : IP address or Server Name of the Fiery
Old Password : Fiery.1 or current password
New Password : Enter new password. Passwords must be at least six characters long and
must include uppercase letters (A - Z), lowercase letters (a - z), numbers (0 - 9), and
non-alphanumeric characters (., !, ?, #, &, etc.).
Confirm New Password : Re-enter your new password.
3. Click OK.
For more information on changing the system password, see the Configuration Guide .
Configuration Page
The Configuration page lists the number of copies made when the Fiery EX12 was last
started. To update the number, restart the Fiery EX12.
Renaming the Fiery EX12
If you rename the Fiery EX12, the name must be fewer than 10 characters.
Administrator login
To run Setup from the Fiery EX12 Control Panel, you must log in with
Administrator privileges.
Clear Server
Clear all server queues by using the Clear Server button in the Setup menu available
through Command WorkStation. Clearing server queues restarts the system.
Local Setup from a Windows computer
If a connection to the Fiery EX12 fails after you change settings in the General or Printer
Setup tab of the Fiery Server Setup dialog box, the Work Group name and Domain name
may be the same. To resolve this problem, assign different names.
Setup