Xerox Stampante DocuColor 12 con Fiery EX12-14994 - Manual (Page 22)

Page 22
XC 701P41810 (EFI Part Number: 45042719)
Finisher/Stacker installed
The following situations can result when you press the Finisher Pause button on the
DocuColor 12:
Stapled job —The Fiery completes printing the job and “Finisher paused” appears on the
Fiery EX12 Control Panel.
Non-stapled job —The Fiery EX12 stops printing the job and “Finisher paused” appears on
the Fiery EX12 Control Panel.
Suspend Printing selected from the Command WorkStation/Control Panel/WebTools —The
Fiery EX12 displays “copier offline.”
Resume Printing selected from the Command WorkStation/Control Panel/WebTools —The
Fiery EX12 displays “Finisher paused.”
Copier interrupt key is pressed on the DocuColor 12 (stapled job) —The Fiery prints the
entire job; when the job is complete, “copier busy” appears on the Control Panel.
Copier interrupt key is pressed on the DocuColor 12 (non-stapled job) —The Fiery EX12
displays “Finisher paused” on the Control Panel and ignores the copier interrupt command.
When you print to the Direct connection, pressing the Interrupt button on the copier may
not work properly.
Specifying installed options for the copier via SMB printing
When you set up the Fiery EX12 for SMB printing, you can also specify installed options,
such as the Finisher and Tray 6. For systems with the Fiery Advanced Controller Interface,
you can specify these options directly from the Fiery EX12.
For systems without the Fiery Advanced Controller Interface, you must use a networked
Windows NT 4.0 computer, as described in the following procedure:
1. Log in as Administrator to a Windows NT 4.0 computer in the same domain as the
Fiery EX12.
2. Locate the Fiery EX12 in Network Neighborhood, and double-click it.
3. Right-click a print connection (Direct, Hold, or Print), and choose Properties.
4. Add the appropriate installed options.
5. Repeat the previous two steps for the other print connections.
Graphic inconsistent
The picture of the Fiery VDP resource manager on page 5-14 of the Printing Guide is not
the same as the picture on page 7 of the User Addendum, or page 2-12 of User Software
Installation, which use a picture of the resource manager as it appears in Windows 2000 and
Mac OS 9.1.
Documentation