Xerox Stampante DocuColor 12 con Fiery EX12-14994 - Manual (Page 17)

Page 17
XC 701P41810 (EFI Part Number: 45042719)
Scanning while a print job is processing
Do not begin scanning a job while a job is in process. Wait until the current job has finished
printing before using Fiery Scan.
Corel Draw/TextBridge Pro 9.0/Pagis 3.0
Fiery Scan does not support CorelDRAW, TextBridge Pro 9.0, or Pagis 3.0.
Match Copy
If you select Match Copy as the color conversion method, some scans may appear pink
when viewed onscreen. These images will print correctly only if you set the CMYK
simulation option to Match Copy in the printer driver.
Number of copies printed
The number of copies printed can be incorrect for interrupted jobs. If a multiple copy print
job is interrupted by a copier error (such as an empty paper tray), in the middle of a copy,
the Fiery EX12 reports to Velocity that it has finished the current copy. Then, when
Velocity reroutes the job to another copier/printer, it starts at the next copy after the
interrupted one.
For example: If you print 10 copies of a print job through Velocity to the Fiery EX12, and
the job is interrupted in the middle of Copy 2, Velocity reroutes the job to another
copier/printer, starting at Copy 3.
EFI Converter 1.0
EFI Converter 1.0 is only available in English, and is supported on all Windows versions
except Windows 95.
All
If a finishing option such as Collating or Stapling is available and selected within the
application or printer driver, unexpected results may occur. To avoid this problem, do not
select the option within the application—select it within the Fiery EX12 PPD.
Long Edge Feed paper sizes differ slightly from corresponding Short Edge Feed paper sizes
in the print properties within applications. For example A5 (LEF) appears as 5.833
x 8.264,
while A5 SEF appears as 5.833 x 8.278. These size discrepancies are negligible and do not
affect the printing result.
When configuring Installable Options in the printer driver for Windows NT, the Add and
Remove buttons are unavailable. Scroll to the Installable Options under the Device Settings
tab to configure the Installable Options.
Microsoft Office
Pattern —When printing pattern fills from Microsoft applications, scaling/resizing them
could cause unexpected color changes, especially if the fill is placed into another
application. To avoid this problem, use solid fills rather than pattern fills.
Microsoft Word 97 —In Microsoft Word 97 on Windows 95/98, when you print jobs of
more than 1,000 pages in reverse order, the first 1,000 pages are RIPped and printed before
the remaining pages are RIPped and printed.
In Microsoft Word 97 on Windows NT 4.0, when you print jobs with Pure Black Text and
Graphics set to Off, the job is printed with black-only text.
Velocity
compliance
EFI Converter
Applications