Xerox Stampante DocuColor 12 con Fiery EX12-14994 - Manual (Page 21)

Page 21
XC 701P41810 (EFI Part Number: 45042719)
2. In the Security dialog box, click the Security Level tab, and select the desired
security level.
3. Click the Trusted Sources tab, and select “Trust all installed add-ins and templates.”
4. Click OK to save your changes.
5. Restart the Office 2000 application.
Job Title/User Name
The Job Title/User Name does not display for Standard TCP/IP for Windows 2000.
Point and Print
Point and Print driver installation is not supported under Windows 2000. Use the WebTool
Installer or the User Software CD to install drivers and create the SMB printer port.
Custom page sizes
You can only print custom page sizes from Windows 2000 if you send the job from a
Microsoft Office 2000 (or later) application. From the application, specify the custom page
size in the print properties. In addition, choose PostScript Custom from the Scale to Paper
Size menu in the Print dialog box, and then click Print.
TCP/IP and DHCP servers
In some cases, Mac OS computers may crash when attempting to obtain an IP address from
a DHCP server while loading the TCP/IP driver. Check the TCP/IP control panel to make
sure you are using a valid IP address and that the router and DNS server addresses are valid
before running applications such as ColorWise Pro Tools.
Graphic Arts Package
Mac X Classic does not support the Graphic Arts Package (GA) Hot folder and TIFF/IT
converter features.
Spot-On
On Mac OS computers, uploaded groups from Spot-On are not associated as ColorSync
profiles. To associate an uploaded group as a ColorSync profile, open the uploaded file in a
resource editor such as Filebuddy or ResEdit and change the Type field to “prof ” and the
Creator field to “sync”.
Print Mode
Occasionally, the copier remains in Print Mode when you attempt to make a copy.
Check the copier timeout values in Tools and optimize as necessary.
A6 paper size
When you specify A6 as the paper size for a job and send the job to print, the copier will
display a message instructing you to load the paper using Short Edge Feed orientation. The
copier only accepts A6 paper when it is loaded using Short Edge Feed.
Copier messages on the Command WorkStation
Occasionally, messages from the copier may vary when displayed on the Command
WorkStation. Check the message on the copier display if you suspect a discrepancy.
However, if the finisher is installed on the copier, see the error message displayed on the
Fiery EX12 Control Panel or Command WorkStation.
Windows 2000
Mac OS
Copier