Konica Minolta bizhub C35 - Manual (Page 379)

Logging in to this machine 15-16
„ If an authentication failure recurs, the problem may be due to incorrect
registration of IC card information. Register IC card information again.
„ When [Card Authentication] is specified for [Authentication Type], a regis-
tered user is authenticated by simply placing the IC card. When [Card
Authentication + Password] is specified, a registered user is authenticated
by placing the IC card and entering the password.
„ Press [User Name] and [Password] to log in by entering the user name
and the password, without using the authentication device.
„ IC card authentication cannot be performed while the machine is in Power
Save mode. After pressing the [Power Save] key to cancel Power Save
mode, place the IC card on the authentication device and complete the
authentication procedure.
When [Card Authentication] is enabled
1
Press [Card Authentication].
"
When using the ID & Print function with IC card authentication, select
[Begin Printing] or [Access Basic Screen] as necessary. For details on
the ID & Print function, refer to “ID & Print” on page 6-4.
2
Place the IC card on the authentication device.
When [Card Authentication + Password] is enabled
1
Press [Card Authentication].
"
When using the ID & Print function with IC card authentication, select
[Begin Printing] or [Access Basic Screen] as necessary. For details on
the ID & Print function, refer to “ID & Print” on page 6-4.
2
Place the IC card on the authentication device.
3
Press [Password] and enter the password.
4
Press [Login].