Konica Minolta bizhub C35 - Manual (Page 114)

[Admin Settings] 3-67
[Postcard] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC)
for printing on the back side of postcards that
has already been printed on.
[Envelope] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC)
for printing on the back side of envelopes that
has already been printed on.
[Label] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC)
for printing on the back side of labels that has
already been printed on.
[Glossy 1] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC)
for printing on the back side of Glossy 1 media
that has already been printed on.
[Glossy 2] Settings -8 to 7
Adjust the 2nd image transfer output (ATVC)
for printing on the back side of Glossy 2 media
that has already been printed on.
[Thick Paper Image
Density] Adjust the density of images printed on thick
paper.
[Cyan] Settings -5 to 5 (Default: 0)
Finely adjust the density of cyan for images
printed on thick paper.
[Magenta] Settings -5 to 5 (Default: 0)
Finely adjust the density of magenta for images
printed on thick paper.
[Yellow] Settings -5 to 5 (Default: 0)
Finely adjust the density of yellow for images
printed on thick paper.
[Black] Settings -5 to 5 (Default: 0)
Finely adjust the density of black for images
printed on thick paper.
[Monochrome Density
Adj.] Settings -2 to 2 (Default: 0)
Finely adjust the density of printed images with
grayscale printing.