Konica Minolta bizhub C35 - Manual (Page 123)

[Admin Settings] 3-76
Changed settings
For increased security, the following settings are set when enhanced security
settings are applied.
"
A changed setting cannot be changed when [Enhanced Security
Mode] is set to [OFF].
"
If password rules have been applied, a password that does not meet
the conditions of the password rules is considered a failed attempt
during authentication.
*1 Set to [AES/3DES] when [Enhanced Security Mode] is set to [OFF].
Administrator mode parameters Changed settings
[Security Settings] - [Security Details]
- [Password Rules] Set to [ON].
[Security] tab in PageScope Web
Connection - [Authentication Setting]
- [General Settings] - [Public Access] Set to [Restrict].
[Security] tab in PageScope Web
Connection - [PKI Settings] - [SSL/
TLS Settings] - [SSL/TLS] Set to [Enable].
[Security] tab in PageScope Web
Connection - [PKI Settings] - [SSL/
TLS Settings] - [Encryption Strength] Set to [AES-256] or [AES-256,
3DES-168].
*1
[Network] tab in PageScope Web
Connection - [E-mail Settings] -
[S/MIME] - [E-mail Text Encryption
Method] Set to [3DES], [AES-128], [AES-192]
or [AES-256].
*1
[Network] tab in PageScope Web
Connection - [FTP Settings] - [FTP
Server Settings] - [FTP Server] Set to [Disable].
[Network] tab in PageScope Web
Connection - [SNMP Settings] -
[SNMP v1/v2c Settings] - [Write] Set to [Disable].
[Network] tab in PageScope Web
Connection - [SNMP Settings] -
[SNMP v3 Settings] - [Write User
Name] - [Security Level], [auth-pass-
word] and [priv-password] Set to [Auth-password/Priv-pass-
word].
[Security Settings] - [Security Details]
- [Registering and Changing Addr.] Set to [Restrict].