Konica Minolta bizhub C35 - Manual (Page 231)

Specifying destinations 10-16
Directly typing in the address
To specify a destination that is not registered with the machine, directly type
in the address.
1
In the initial Scan to E-mail mode screen, press [Direct Input].
2
Press [E-mail].
3
Type in the E-mail address.
4
Press [OK].
"
To specify multiple destinations, specify all destinations where the
data is to be sent.
"
If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], an address cannot be directly
typed in. For details on [Manual Destination Input], refer to “[Security
Settings]” on page 3-70.
Selecting from the log
A destination can be selected from the log of the last five transmissions.
1
In the initial Scan to E-mail mode screen, press [Log].
2
Select the destination from the list, and then press the [Start] key.
"
Only one destination can be selected from the log.
"
The only destinations that appear in the log are those specified after
pressing [Direct Input].
In addition, destinations specified with broadcast transmissions do not
appear in the log.
"
When the machine is turned off, the log is cleared.
"
If [Admin Settings] - [Security Settings] - [Security Details] - [Disable
Job History Display] is set to [ON], a destination cannot be selected
from the log.