Konica Minolta bizhub C35 - Manual (Page 246)

Specifying destinations 10-31
5
Press [OK].
"
If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], an address cannot be directly
typed in. For details on [Manual Destination Input], refer to “[Security
Settings]” on page 3-70.
"
If [Admin Settings] - [Security Settings] - [Security Details] - [Restrict
Scan to USB] is set to [Restrict], [USB Memory] is not available. For
details on [Restrict Scan to USB], refer to “[Security Settings]” on
page 3-70.
"
With a USB Memory transmission, only one destination can be speci-
fied.
With [HDD]
1
In the initial Scan to Folder mode screen, press [Direct Input].
2
Press [HDD].
3
Press [Save Document].
4
If user authentication settings have been specified, select [Public] or [Pri-
vate].
5
Specify a setting for [Document Name].
6
Press [OK].
"
If [Admin Settings] - [Security Settings] - [Security Details] - [Manual
Destination Input] is set to [Restrict], an address cannot be directly
typed in. For details on [Manual Destination Input], refer to “[Security
Settings]” on page 3-70.
"
With an HDD transmission, only one destination can be specified.
"
Scan data saved on the hard disk can be saved to a computer by
copying it with PageScope Web Connection. For details, refer to the
[Reference Guide].